miniz-forum.de Foren-Übersicht  
Willkommen im großen privaten MiniZ Forum, dem Treffpunkt für junge und alte MiniZ Fans.
Navigation
LoginLogin
RegistrierenRegistrieren
FAQBoard FAQ LexikonMiniZ-Lexikon
MitgliederlisteMAP MitgliederlisteMitgliederliste
BenutzergruppenBenutzergruppen ForenregelnForenregeln
FotogalerieFotogalerie DownloadsDownloads
ProfilProfil  

Suche Suchen
Was suchst Du?
  
<< erweiterte Suche >>

Werbung
dNano-Forum.de

MiniZ-Forum.de Banner
Ihr wollt zu uns verlinken?
Benutzt bitte einen unserer Banner dafür:
MiniZ-Forum.de 468x60 Banner (.gif)
MiniZ-Forum.de 234x60 Banner (.gif)
Werbung
Kyosho International Masters 2017

 
Neues Thema eröffnen   Neue Antwort erstellen    miniz-forum.de Foren-Übersicht -> Kyosho Mini-Z Masters
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  
Autor Nachricht
Racer
Site Admin


Anmeldedatum: 08.12.2008
Beiträge: 2712
Wohnort: Henstedt-Ulzburg
Alter: 41

BeitragVerfasst am: 15.12.2016, 09:15    Titel: Kyosho International Masters 2017

Hallo Gemeinde

auch 2017 veranstalten unsere Freunde in Tschechien wieder ihr Masters in Prag. Datum ist der 31.3. bis 2.4.

Eingefügtes Bild, wurde evtl. verkleinert. Rechtsklick->Bild/Grafik anzeigen für volle Größe.

Details wie immer auf www.mini-z.cz oder den sozialen Medien.

BG

Racer
_________________
[ Mini-Z: Racers Garage]
[ YouTube: RacersVideos ]
---
Keine Beratung via PN!
---
Aktuell in Mini-Z Pause
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Racer
Site Admin


Anmeldedatum: 08.12.2008
Beiträge: 2712
Wohnort: Henstedt-Ulzburg
Alter: 41

BeitragVerfasst am: 02.01.2017, 09:36    Titel:

Die Anmeldung für das Event ist ab heute möglich.

https://www.myrcm.ch/myrcm/main?hId.....p;dId[E]=30638&pLa=de
_________________
[ Mini-Z: Racers Garage]
[ YouTube: RacersVideos ]
---
Keine Beratung via PN!
---
Aktuell in Mini-Z Pause
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
phil9000


Anmeldedatum: 01.12.2008
Beiträge: 131

Alter: 34

BeitragVerfasst am: 01.02.2017, 10:11    Titel: Klasse Modified

Hallo Kollegen,

Für alle die die Änderungen vom Masters Reglement übersehen haben.....

Es gibt heuer eine Klasse "Modified" in der alles erlaubt ist.....
Reglement für diese Klasse ist jetzt das gleiche wie PNWC Pan Car Modified, nur mit Tourenwagen Karosserien!!!

Es können daher auch alle Brushless Regler mit diversen Akkus gefahren werden!!!
Reglementiert ist wie beim PNWC nur max. 8.4V !!!

Mfg Philipp
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Jens k


Anmeldedatum: 06.03.2015
Beiträge: 128

Alter: 49

BeitragVerfasst am: 23.02.2017, 14:17    Titel:

Wo kann ich das Reglement nachlesen ???
Gruß
_________________
Ps. Ohne schmieren ans Ziel kommen.
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Kay-Dee
Site Admin


Anmeldedatum: 08.04.2008
Beiträge: 2922
Wohnort: Hamburg Norderstedt
Alter: 48

BeitragVerfasst am: 23.02.2017, 17:35    Titel:

Moin Moin

Hier mal die englische Version für Euch

Dear Mini-Z Racers,

after successful International Mini-Z Masters in Prague we have decided to organize next year of races in the heart of the Europe, in the historical centre of Prague.
We would like to invite you to Michnův palác – Tyršův dům which is in the centre of Prague (five minutes walk to Charles brigde).
Including International Mini-Z Masters is Championship of Czech Republic in class Mini-Z.

CATEGORIES
• MINI-Z Production Class(standard)
• MINI-Z Touring Class (expert)
• MINI-Z Competition Class(expert open)
• GROUP-C (expert LM)
• FORMULA 1
• MODIFIED

Starting fee
Each driver has to pay starting fee 1000,- CZK ( 39,- EUR). This allows the driver to start in 1 category.
For each other category driver has to pay 270,- CZK (10,-EUR)
Payment only in advance.
Small gift for each driver.
Registration from 2.1.2017 to 28.2.2017 direct via www.myrcm.ch
Please note that we accept online registration only.
Starting fees have to paid in 5 days. If I tis not paid, driver will be cancelled.

Programme
Friday 31.3.2016 – 19 p.m. – free practice, registration
Saturday 1.4.2017
8 a.m. – group picture and opening ceremony, registration, drivers briefing
9:00 a.m. - start of the heats
In the evening – surprise for all drivers
Sunday 2.4.2017
8:30 a.m. - finals
17 p.m. – price giving ceremony

Address of racetrack:
Michnův palác-Tyršův dům
Újezd 450
Praha 1-Malá strana
118 00

Facebook: 1.Mini-Z Racer ČR
www.mini-z.cz

Attention – race is open for
CATEGORIES
• MINI-Z Production Class(standard) 60 racers
• MINI-Z Touring Class (expert) 30 racers
• MINI-Z Competition Class(expert open) 30 racers
• GROUP-C (expert LM) 30 racers
• FORMULA 1 20 racers
• MODIFIED 20 racers
When it is full the number of racers in category, registration will be closed.
For opening of category must be 10 registrated drivers.

Mini-Z Regulations
for the season 2016/2017
Here you will find the current rules of the competition!

For all categories:
- it is forbiden to lubricate tires
- it is forbiden to use moss and silicon tires
- it is forbiden to use 3D parts ( allowed in Modified category)

MINI-Z Production class
CHASSIS:
MR-01
MR-015
MR-02
MR-03
MA-010
MA-015
MA-020
Chassis modifications are forbidden.
BODY:
There are only original KYOSHO and R246 bodies allowed, specifically manufactured and
commercially sold for Mini-Z Models. There are no Group C car bodies admitted. No additional spoilers, bar potentially existing original spoilers, may be attached. All additional parts must be attached to the bodies, except those, which will be lost during the race. The bodies are only allowed to be modified on the inside to allow free movement of the wheels, wheel archenlargements are prohibited.
Body mounts and mounting points can be changed to allow the body to fit clean and as intended onto the vehicle chassis.
Additional stiffening of the body is not allowed. (It is allowed tape of front spoiler which copies contour of original shape, reinforcement of front holder hole (Front Body Mount)).
If the bodies have no antenna hole, one with 5 mm in diameter may be drilled.
Sharp front spoilers are allowed to be rounded or abraded. Unpainted car bodies must be painted with at least one color.
Wheelbase: maximum is 98 mm.
ELECTRONICS:
All electronic components have to be standard including the PCB, all adjustment forbiden. Only four AAA battery cells NiMh, NiCd have to be used.
MOTOR:
KYOSHO standard kit motor MZ-09P, no brushless motor. Main gear and pinion only original KYOSHO kit version.
WHEELS:
Only original KYOSHO plastic rims with 20mm diameter are allowed, Group C or Formula 1 wheels are forbidden.
TIRES:
Only MZW-37, MZW-38, MZW-02,MZW-17 tires are allowed.
OPTION PARTS:
Gold contacted chassis are forbidden.
Following option parts are permitted to use: ball bearings (no ceramic ball bearings)
MR-01: MZW-04, MZW-05
MR-015 and MR-02: MZW-201, MZW-205, MZW-214, MZW-221, MZW-222
MR-03: MZW-401, MZW-403, MZW-404, MZW-409, MZW-410, MZW-423
MA-010, MA-015 and MA-020: MDW-004, MDW-025, MDW-100-01

MINI-Z Touring class
CHASSIS:
MR-01
MR-015
MR-02
MR-03
MA-010
MA-015
MA-020
BODY:
There are only original KYOSHO and R246 bodies allowed, specifically manufactured and
commercially sold for Mini-Z Models. There are no Group C car bodies admitted. No additional spoilers, bar potentially existing original spoilers, may be attached. All additional parts must be attached to the bodies, except those, which will be lost during the race. The bodies are only allowed to be modified on the inside to allow free movement of the wheels, wheel arch enlargements are prohibited. Body mounts and mounting points can be changed to allow the body to fit clean and as intended onto the vehicle chassis. Additional stiffening of the body is allowed. If the bodies have no antenna hole, one with 5 mm in diameter may be drilled. Sharp front spoilers are allowed to be rounded or abraded. Unpainted car bodies must be painted with at least one color.
Wheelbase: maximum is 98 mm.
ELECTRONICS:
All electronic components have to be standard including the PCB, exceptions are in and/or
external turbo. The optimization of the antenna is permitted. Only four AAA battery cells NiMh, NiCd or two R246 LiFe (R246-1802) have to be used.
MOTOR:
Every motor for the Mini-Z is allowed.
WHEELS:
Only original KYOSHO and R246 rims are allowed, Group C or Formula 1 wheels are forbidden.
TIRES:
Only MZW-37, MZW-38, MZW-02,MZW-17 tires are allowed.
OPTION PARTS:
Following option parts are permitted to use: ball bearings
and all KYOSHO and R246 Mini-Z tuning parts.

MINI-Z Competition class
CHASSIS:
MR-01
MR-015
MR-02
MR-03
MA-010
MA-015
MA-020
And all commercial sell chassis (PN Racing,Atomic etc.) – only compatible with Kyosho chasis, no carbon, fiberglass.
BODY:
There are only original KYOSHO and R246 bodies allowed, specifically manufactured and
commercially sold for Mini-Z Models. There are no Group C car bodies admitted.
Additional spoiler is enabled, for example: typ PN, max. height with car 45 mm, max. width 80 mm.
Bar potentially existing original spoilers, may be attached. All additional parts must be attached to the bodies, except those, which will be lost during the race. The bodies are only allowed to be modified on the inside to allow free movement of the wheels, wheel arch enlargements are prohibited. Body mounts and mounting points can be changed to allow the body to fit clean and as intended onto the vehicle chassis. Additional stiffening of the body is allowed. If the bodies have no antenna hole, one with 5 mm in diameter may be drilled. Sharp front spoilers are allowed to be rounded or abraded. Unpainted car bodies must be painted with at least one color.
Wheelbase: maximum is 98 mm.
ELECTRONICS:
All electronic components have to be standard including the PCB, exceptions are in and/or
external turbo. The optimization of the antenna is permitted. Only four AAA battery cells NiMh, NiCd or two LiFe have to be used.
MOTOR:
Every motor for the Mini-Z is allowed.
TIRES:
Tires are allowed from all commercial manufacturers.
OPTION PARTS:
All official distributed option parts for Mini-Z touring cars are permitted.

GROUP-C
CHASSIS:
MR-02LM
MR-03LM
BODY:
There are only original KYOSHO Group C bodies allowed, specifically manufactured and
commercially sold for Mini-Z Models. No additional spoilers, bar potentially existing original
spoilers, may be attached. All additional parts must be attached to the bodies, except those, which will be lost during the race. The bodies are only allowed to be modified on the inside to allow free movement of the wheels, wheel arch enlargements are prohibited. Body mounts and mounting points can be changed to allow the body to fit clean and as intended onto the vehicle chassis.
Additional stiffening of the body is allowed. If the bodies have no antenna hole, one with 5 mm in diameter may be drilled. Sharp front spoilers are allowed to be rounded or abraded. Unpainted car bodies must be painted with at least one color.
Wheelbase: maximum is 102 mm.

ELECTRONICS:
All electronic components have to be standard including the PCB, exceptions are in and/or
external turbo. The optimization of the antenna is permitted. Only four AAA battery NiMh, NiCd cells or two R246 LiFe (R246-1802) have to be used.
MOTOR:
Every motor for the Mini-Z is allowed.
WHEELS:
Only original KYOSHO, R246 and other producers with max. 20 mm diametr of wheel are allowed for group C. Formula 1 wheels are forbidden.
TIRES:
Only Only MZW-37, MZW-38, MZW-02,MZW-17, MZT-301 and MZT-302 tires are allowed.
OPTION PARTS:
Following option parts are permitted to use: ball bearings
and all KYOSHO and R246 Mini-Z tuning parts.

FORMULA 1
CHASSIS:
MF-010
MF-015
BODY:
Original KYOSHO Formula 1 bodies are allowed.
ELECTRONICS:
All electronic components have to be standard including the PCB, exceptions are in and/or
external turbo. The optimization of the antenna is permitted. Only four AAA battery cells have to be used.
MOTOR:
Every motor for the Mini-Z is allowed.
WHEELS:
Only original Formula 1 rims are allowed.
TIRES:
Only MFT-01 and MFT-02 tires are allowed
OPTION PARTS:
Following option parts are permitted to use: ball bearings and all KYOSHO and R246 Mini-Z tuning parts. Front bumber (MZ19, MZ02C, …) don´t have to be original, but must not be metal either it´s parts. Max. width is 85 mm, max. height is 15 mm, it can´t have moving parts( balls, roller, ball bearings, pulley, etc.).
Tie rod are allowed also from others producer.
It is also allowed to use motor holder PN or Atomic.

MINI-Z Modified

CHASSIS:
Opened for chassis 94-98 mm.

BODY:
Alowed to use bodies also from other commercial producer, bodies must be made for mini-z car type, no lexan. Bodies can be modified with minimum efect on exterion of a car. Back spoiler can be removed.
Holes for wheels can be slightly enlarge. Lower portions of the body may be cut for ground clearance in front, sides or rear.
Body material may be shaved or thinned internally for weight reduction. Technical inspection officials reserve the right to disqualify any modified body deemed to be too fragile due to excessive material removal. Body panels may be reinforced or strengthened internally without affecting external appearance. Body has to have instalatted lexan or original windows.
Small body parts such as mirrors, canards, exhausts may be omitted or removed to prevent racing damage and debris on track. All rear wing comes with the body may be installed according to the no height limited. Custom wings allow to use on the body, according to the height limited 45mm from the ground.It is not allowed to you bodies for Group C (LM).

ELECTRONICS:
Any battery maximum 8.4 volt.
Additional battery for transponder allowed.

MOTOR:
Can be use any model of the all brush and brushless motor, legal modify the brushes, magnet, cut the cam head, but you MUST be use ORIGINAL Racing motor can, motor cover and armature. If any official suspects motor illegal tampering, the driver will be subject to disqualification.

OPTION PARTS:
Can be use all commercial tuning parts. Can use 3D parts and prototype parts..

WHEELS:
All wheels are allowed. Maximum front wheel width is 8,5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 21mm.

TIRES:
It is allowed to use all gum Aires made for Mini-z Racer. It is not allowed to use home made tires, silicon tires, urethan tires, moss tires, ethyl carbamate tires. It is not allowed to use any grip preparations, etc. Tires heaters are allowed. Tires can be clean only with 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply.
If you have any questions or concerns to the rules, contact me on:
tretera@peckamodel.cz
Wink
_________________
LMN Racing Team, PN Worldcup Family
Eingefügtes Bild, wurde evtl. verkleinert. Rechtsklick->Bild/Grafik anzeigen für volle Größe.
PNWC 2011 Hamburg, PNWC 2013 Paris, PNEC 2015 Wels, PNWC 2015 Maranello, PNWC2016 Lyon, PNWC2017 Surabaya, PNWC 2018 Buenos Aires
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Montie


Anmeldedatum: 10.10.2008
Beiträge: 1565
Wohnort: Schwarzeide PLZ:01
Alter: 38

BeitragVerfasst am: 28.03.2017, 16:41    Titel:

wird man Online etwas mit verfolgen können?
_________________
one28racing,

ca 55qm 30er RCP Bahn privat
ca.60qm 50er RCP Bahn privat
Hamburg Km:akt. 9980km Smile,Fellbach: 1150Km
SRCC Cup: 230km
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
zama


Anmeldedatum: 27.02.2008
Beiträge: 533
Wohnort: 64807

BeitragVerfasst am: 28.03.2017, 20:12    Titel:

Ja. Bei myrcm.ch . Dann bei Online Anlässen schauen. Da müsste was gehen am Wochenende.

Gruß
_________________
SRCC-Devils
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Beiträge der letzten Zeit anzeigen:   
Neues Thema eröffnen   Neue Antwort erstellen    miniz-forum.de Foren-Übersicht -> Kyosho Mini-Z Masters Alle Zeiten sind GMT + 1 Stunde
Seite 1 von 1

 
Gehe zu:  
Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.


Impressum

MassivHolz Möbel bei Frankfurt Wiesbaden - Alleinerziehend
Powered by phpBB © 2001, 2005 phpBB Group
Deutsche Übersetzung von phpBB.de